Model: LJJZ4-CNC-S1800×3000
Features:
▶Fuselage of entire machine design scientific, reasonable and steadily. And it welds with square steel pipe with the thickness of 10mm and make products steady when combining the corner.
▶Adopt the plunger type large-scale hydraulic pressure station, the pressure stable, offered the pressure well and the noise is low.
▶ The electrically controlled box independent laying independently. It is convenient, even more is advantageous for the crimping angle quality real-time monitoring. The transmission connection uses the aerospace special-purpose receptacle, safe and stable.
▶ Adopt original installation import flat square guide rail, which can guarantee the precision of the heads when moves horizontally. Transmission adopts the original imported installation ball bearing master screw.
▶ The precision is extremely high so it can guarantee group angle quality.
▶ The servo controlling machines, servo motor, person-machine touching the contact surface are adopt the original imported installation of Japanese Mitsubishi system, and the increase assistance brake system. It is stable and efficiency.
▶ The processing smallest scope is may reach 510x510mm, the manual mediation can realized to 500x500mm, it can suitable for all kinds of windows and doors that enterprise’s processing to need.
▶ Used for corner punching and riveting combination of aluminum window and door four corner connecting at one time is available which greatly increased the production efficiency.
▶ Clamping device can adjust forward and back, it is easy to operate.
▶ Adopt CNC system can realize automatic and accurate locating thus can produce high accuracy windows.
▶ Wide profile processing range due to convenient corner combining cylinder setting.
▶ Suitable for various kinds high quality and high volume windows production.
▶ Can adjust the crimping position on the working table;
▶ The inner positioning is changed to the adjustable lift type;
▶ The above clamping device is equipped with second-displacement device;
▶ The height and thickness of outside positioning device can be adjusted;
▶ Add once again feeding adjustable pressure device;
▶ The clamping cylinder can move backward so it's convenient to place the profiles;
▶ It's convenient to change cutters with counters equipped.
▶ Parker patent, unique design.
Parameter:
▶ Voltage:380V 50HZ
▶ Power:7.5KW
▶ Air pressure:0.5-0.8MPa
▶ Air consumption:0.45L/time
▶ Hydraulic system pressure:15MPa
▶ Oil tank capacity:60L
▶ Corner assemble:0-50mm
▶ Max. dimension of window:1800x3000mm
▶ Min. dimension of window:510x510mm
▶ Max. width of profile:100mm
▶ Seam of crimping error: ≤0.15mm
▶ Overall dimension:5450mm×1900mm×2500mm
