Rotary glue-spreading table is a working table that is used to spread two-component glue or structure glue over the aluminum groove type hollow glass or curtain wall glass in the process of production.
The supporting arm can be adjusted based on glass dimension.
The support device is equipped with vacuum chuck. So no manual holding is needed on spreading.
Operators are capable to operate the three foot switches to control the lifting and rotating of glass about the 0~90 degree and 180~360 degree rotation as to complete sealing of glass edge.
The machine is simple in operating procedures and high in working efficiency.
Voltage: 220V 50HZ
Air pressure: 0.5-0.8Mpa
Air consumption: 80L/min
Glass Dimension: Max.2000×2000mm
Rotation Speed: 0～3.5r/min
Overall dimension: 970mm x 870mm x 850mm