Controlled by PLC.
Touching screen is imported from Japan famous brand to make the operation convenient.
There are 5 different conveying speed to be well applied.
The width of aluminum spacer bar can be measured and adjusted automatically.
Butyl spreading is well-proportioned and the linearity is good.
Temperature and pressure can adjust automatically. Also time of pre-heating can be set, then the machine can be turned on and off automatically.
Adopting the imported hydraulic and pneumatic supercharging system makes sure of the stability and continuity of the glue.
The glue jar warning system will make alarm when glue material is used up.
Advanced device guarantees and best spreading effect on the arc aluminium frame.
Voltage: 380V 50HZ
Air pressure: 0.6-0.8Mpa
Air consumption: 100L/min
Transmit speed: 0-30m/min
Working speed: 15-30m/min
Capacity of glue tank : 14L
Squeeze pressure: 6-20Mpa
Adjustable range: 6-19.5mm
Overall dimension: 3000mm x 680mm x 1080mm